2006 expedtition fuel pump driver module problems

2006 expedtition fuel pump driver module problems drivers#
2006 expedtition fuel pump driver module problems code#

IF YOU CHECK YOUR VEHICLE WITH A SCAN TOOL, THE MOST COMMON BAD FUEL SYSTEM CONTROL MODULE ERROR CODE IS P069E. IF NO POWER IS FOUND AT THE POWERTRAIN CONTROL MODULE, REPLACE WITH PROGRAMMED UNIT. IF YOU FIND POWER AT THE POWERTRAIN CONTROL MODULE, LOCATE THE BREAK IN THE WIRE TO REPAIR. AT THE POWERTRAIN CONTROL MODULE, CHECK PIN 50, IN THE BLACK CONNECTOR, FOR 12 VOLTS WITH THE KEY ON, FROM THE DARK GREEN/WHITE WIRE. AFTER COMPLETING THE STEPS ABOVE, IF YOU FIND NO POWER AT THE FUEL SYSTEM CONTROL MODULE, AT THE DARK GREEN/WHITE WIRE, MOVE TO THE POWERTRAIN CONTROL MODULE. wire/PCMВ integrityВ pass If any of the three conditions have been satisfied. We are head manufacuturer that intergrates R&D ,manufacturing,sales and service. *Important Green/white wire conditions*Д¬heck for one of the following three conditions. Find Fuel Pump Driver Module,Cooling Fan Module,Car Key Remote,Auto Part from Qinuo Electronics Co.Ltd. IF THE POWERTRAIN CONTROL MODULE IS SENDING THE SIGNAL TO COMMAND THE FUEL PUMP ON, THEN THE TEST LIGHT WILL BE ILLUMINATED. WITH A TEST LIGHT CONNECTED TO THAT WIRE, TURN THE KEY TO THE RUN POSITION. I can say it is NOT above the spare tire, it is NOT behind the right or rear tire on the frame wall, and it is NOT in front of the tank. Due to itвЂ™s placement in the vehicle (usually at the rear on or near the frame), the fuel pump driver module is exposed to the elements. from home, have spent days looking for that stink'n part location, have called delerships and part stores but with no luck. The Ford 5.4 L Triton engine has been known to have problems with the fuel pump driver module.

NEXT, CHECK FOR FUEL PUMP SIGNAL AT THE FUEL SYSTEM CONTROL MODULE.Д¤. I have the same problem and can NOT find it anywhere. THIS WILL POWER THE PUMP TO RUN AND CHECK FOR A FAULTY FUEL PUMP.ДЈ. CONNECT PIN32 (RD/WH BATT + ) TO PIN47 (GY FUEL PUMP 12+) CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND)Дў. PLEASE REFERENCE THE DIAGRAM TO HELP PROPERLY DIAGNOSE A FAULTY FUEL SYSTEM CONTROL MODULE.Д«EFORE TESTING, ENSURE THAT BOTH FUEL RELATED FUSES HAVE BEEN REPLACED:ДЎ.

2006 expedtition fuel pump driver module problems drivers#

Second is the Fuel Pump Drive Module - Located on drivers side rear chassis just behind the Air Spring on frame. YOU WILL ALSO FIND THE PIN OUT DIAGRAM FOR THE FUEL SYSTEM CONTROL MODULE FOUND ON 2007 AND NEWER GM VEHICLES. First is the Inertia Fuel Shut Off Switch - Located on driver side rear cargo area behind trim.

AT THE BOTTOM OF THIS PAGE, YOU WILL FIND THE YOUTUBE VIDEO FOR THIS PROCEDURE.